鞋类产品及相关材料检测报告

The tensile strength test gives a reliable indication of the quality of the leather. Improperly lubricated and partially degraded leathers give low values for tensile strength. The orientation of the specimen in relation to the backbone and the location of the specimen on the hide influence the results significantly. This test method is excellent for development, control, specification acceptance, and service evaluation of leather. This test method may not apply when the conditions of test employed differ widely from those specified in the test method.

1.1 This test method covers the determination of the load required to rupture a leather test specimen having a 1/2-in. (12.7-mm) width. The load to rupture pided by the original unstretched cross-sectional area gives the tensile strength. It may be used for all types of leather that are smooth and firm enough to permit accurate thickness measurements. This test method does not apply to wet blue.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D2209-2000(2004)由美国材料与试验协会 US-ASTM 发布于 2000。

ASTM D2209-2000(2004) 在中国标准分类中归属于: Y45 皮革加工与制品综合。

检测项目及标准

序号 检测标准 检测对象 检测项目

1 鞋-附件试验方法：金属附件：耐腐蚀试验 ISO 22775:2004（E)SASO ISO 22775:2007BS EN ISO 22775:2004 鞋类产品及相关材料 储存法

2 鞋　整鞋测试方法　鞋面和鞋底的结合力 ISO 17708:2018 鞋类产品及相关材料 剥离强度

3 标准消费者安全规范:玩具安全 ASTM F963-17 4.6 鞋类产品及相关材料 小部件测试

4 小部件测试 The American federal regulations part 16CPSC 16 CFR Part 1501 鞋类产品及相关材料 小部件测试

5 皮革抗拉强度的标准试验方法 ASTM D2209-00(2015) 鞋类产品及相关材料 抗拉及延伸

6 皮革的延伸性标准试验方法 ASTM D2211-00(2015) 鞋类产品及相关材料 抗拉及延伸

7 抗拉强度和断裂延伸率 SATRA TM29:2017(2019) 鞋类产品及相关材料 抗拉及延伸

8 鞋-鞋面,内里,鞋垫的测试方法-撕裂强度 ISO 17696:2004(E)SASO ISO 17696:2006 鞋类产品及相关材料 撕裂强度

9 裤形撕裂测试 SATRA TM30:2017 鞋类产品及相关材料 撕裂强度

10 用罗斯挠曲装置测定橡胶切口扩展的试验方法 ASTM D1052-09(2019) 鞋类产品及相关材料 曲折测试